Cloning Procedures (Cont.)
Teach Master TV Setup to Target TV
Note: You may also use the Ez Download utility to complete the Teaching process, if desired. See “Ez Download Utility” on pages 18 to 20 for further information.
1.Turn ON the Target TV.
The next step depends on whether the Express Script Installer Menu Wizard appears on the screen:
•If the wizard is displayed, the TV is in the required factory default state. Exit the wizard, and then, go to step 3.
•Otherwise, ensure the Target TV is in
2.Use the Installer Remote to access the Target TV Installer Menu (see “Accessing the Installer Menu” on page 21 for further information). Set Installer Menu item 117 FACT DEFAULT to 1, and press OK. When the value changes back to 0, press OK again to exit the Installer Menu. This step restores factory default settings on the TV.
3.Tune/set the TV to an analog or digital channel or Aux input (ideally the same source tuned for
4.Insert the USB memory device with the TLL file into the Target TV’s USB port.
5.Press MENU on the Installer Remote to display the TV setup menus, use the arrow navigation keys to select/highlight the Option menu icon, and then press the number “7” key a total of seven times to display the TV Manager / USB Download Menu.
6.With the TV Manager / USB Download Menu on display, use the Up/ Down arrow keys to select Teach To TV (TLL), and then press OK.
7.In the Teach To TV (TLL) window, use the Up/Down arrow keys to select the Master TV Setup you want to install.
Note: Filenames for TLL files Learned from a TV are comprised of the TV model and a
8.Press OK when you are ready to initiate the Teaching process.
Teaching status will be shown on a progress bar in a new window. Do NOT remove the USB device until Teaching is complete. When the Teaching process is complete, the TV will briefly display a “Teaching Completed” window and then exit the TV Manager / USB Download Menu.
9.Remove the USB device, and verify that the Master TV Setup is now resident on the Target TV.
After the Teaching process is complete, the TV tunes according to the setting of Installer Menu item 004 STRT CHANNEL (Start Channel). If a Start Channel is specified, the TV will tune to that channel; otherwise, the TV will return to the last channel tuned.
TV Manager
USB |
| Ez Download |
|
|
| Logo Image Download |
|
|
|
|
|
|
| Upgrade TV Software |
|
|
| Upgrade PTC Software |
|
|
| Teach To TV (TLX) |
|
|
|
|
|
|
| Teach To TV (TLL) |
|
|
|
|
|
CC | Previous | OK | |
Teach To TV (TLL)
CC | Previous | OK |
Updating TLL File... 50 %
Do not remove the USB from the port! Do not unplug!
45 |