Cloning Procedures (Cont.)
Learning / Teaching a Master TV Setup using a TLL File
This section describes how to Learn and/or Teach a Master TV Setup using a TLL file.
Before You Begin
•Learning and Teaching is only possible between identical model TVs.
•Complete the Custom Master TV Setup procedure or run the Express Script Installer Menu Wizard (see pages 31 to 35 or pages 12 to 17, respectively).
•Both the Master and Target TVs must be in
•Ensure the USB device has been formatted with FAT format.
•You may edit the filename as part of the Learning procedure; however, a file with edited contents will not be recognized.
•It is not possible to clone a Master TV’s clock. Either set a Target TV’s clock manually, or use the Auto Clock setting in the TV setup menus.
Caution: Do not unplug the TV power cord or remove/ disconnect the USB memory device while Learning or Teaching, as doing so may cause the TV to malfunction or harm the USB device, respectively.
Learn Setup from Master TV
1.Ensure the Master TV is set up completely and in
2.Insert the USB memory device into the USB IN port on the Master TV.
3.Press MENU on the Installer Remote to display the TV setup menus, use the arrow navigation keys to select/highlight the Option menu icon, and then press the number “7” key a total of seven times to display the TV Manager / USB Download Menu.
4.To gain access to the “Learn From TV” options in the TV Manager / USB Download Menu, key in the following number sequence on the Installer Remote:
5.Use the Up/Down arrow keys to select Learn From TV (TLL), and then press OK.
6.In the Learn From TV (TLL) window, to differentiate this TLL file from others, you can use the Up/Down arrow keys to change the last five digits of the filename. Press OK when you are ready to initiate Learning.
Learning status will be shown on a progress bar in a new window. Do NOT remove the USB device until Learning is complete. When the Learning process is complete, the TV Manager / USB Download Menu will reappear on the screen.
7.When Learning is done, press CC or 
on the Installer Remote to exit the TV Manager / USB Download Menu, and remove the USB memory device from the Master TV.
TV Manager
USB | Ez Download |
| Logo Image Download |
| Upgrade TV Software |
| Upgrade PTC Software |
| Teach To TV (TLX) |
| Teach To TV (TLL) |
| Learn From TV (TLX) |
| Learn From TV (TLL) |
|
|
CC | Previous | OK |
Learn From TV (TLL) |
| |
Select the file name and press OK to start |
| |
| ► |
|
|
| |
| ► |
|
CC | Previous | OK |
Learn From TV (TLL)... 25 %
Do not remove the USB from the port! Do not unplug!
44 |