DVR (DIGITAL VIDEO RECORDER)
77
Progressing the Timeshift function
After selecting the TTiimmeesshhiifftt MMooddee OOnn, press the EENNTTEERR
button.
■As soon as Timeshift starts, a progress bar indicating the
current recording status is displayed in the bottom of the
screen.
■Press the EEXXIITTbutton to hide the ‘Progress Bar’ or press
the EENNTTEERRbutton to display the 'Progress Bar'.
■This function is preserved even change a channel on pro-
gressing the Timeshift.
When finishing the Timeshift function, enter the option
menu and turn TTiimmeesshhiifftt MMooddeeOOffff.
NOTE
DVR (Digital Video Recorder): A device which
records and plays broadcast program contents
onto a hard disk in TV or SET TOP BOX.
If available hard-disk space is low when Timeshift
is initiated, the oldest information is deleted.
In order to save hard-disk space, nothing is saved
when there is no signal.
The total storage space of the hard-disk is 160
GB. 10GB minimum is reserved for Timeshift.
When turning power on, it may take up to 3 mi-
nutes to initialize the HDD.
The Timeshift function will not initiate for a copy-
protected program.
Because an analog broadcast is transferred to a
digital signal, video that contains rapid movement
may show "cross stripes". This happens when the
analog signal is compressed and then restored in
the digital signal. The unit will attempt to reduce
this excessive picture noise.
When using the PIP/POP mode, Timeshift is
stopped.
Timeshift is available in AV1, AV2, Antenna, Cable
mode.
Timeshift is available in Component1,2, HDMI1,
2 mode.
Timeshift is not available for Audio only channels.
The timeshift may not work properly in some
audio streams.
2
1
TThhee ‘‘PPrrooggrreessss BBaarr’’??
This function indicates a possible DVR reshowing
section, a current on-screen and real on-broad-
casting position, a section of section-recording.
Status of current displayed video.
Current save time.
15 minute intervals from Timeshift start time.
(Total - one hour).
Indicates current Timeshift position.