LG Electronics 42PG10, 50PG10 External Equipment Setup, HD Receiver Setup, Component Connection

EXTERNAL EQUIPMENT SETUP

■To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

HD RECEIVER SETUP

EXTERNAL EQUIPMENT SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

Component Connection				RGB(PC)	(RGB/DVI)
1. How to connect		TROL IN	COMPONENT IN			HDMI/
		MOTE
	Connect the video outputs (Y, PB, PR) of the digital set-	2				2
1
	top box to the COMPONENT IN VIDEO 1 jacks on	1				1
	the TV. Match the jack colors (Y = green, PB = blue, and
			VIDEO		AUDIO
	PR = red).
2	Connect the audio output of the digital set-top box to
	the COMPONENT IN AUDIO 1 jacks on the TV.
2. How to use			1		2

■Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box. operation) ■ Select the Component 1 input source on the TV using

the INPUT button on the remote control.

Y PBPRL R

■If connected to COMPONENT IN2 input, select the Component 2 input source on the TV.

Supported Resolutions

			Y, CB/PB, CR/PR
Signal	Component	HDMI
			Resolution	Horizontal	Vertical
	Yes	No		Frequency(KHz)	Frequency(Hz)
480i
480p	Yes	Yes		15.73	59.94
			720x480i
				15.73	60.00
720p	Yes	Yes
1080i	Yes	Yes	720x480p	31.47	59.94
				31.50	60.00
1080p	Yes	Yes
				44.96	59.94
			1280x720p
				45.00	60.00
			1920x1080i	33.72	59.94
				33.75	60.00
				27.00	24.00
			1920x1080p	33.75	30.00
				67.43	59.94
				67.50	60.00

16