LG Electronics 42PM1M owner manual Basic Operation, Turning the monitor On, Volume Adjustment

U514Aen 98/2/18 4:26 AM Page 16

Basic Operation

Basic Operation

Turning the monitor On

Turning on the set just after installation

1.Connect power cord correctly, the set is switched to standby mode.

2.Press the ON/OFF (or r / I), INPUT SELECT button on the set or press the POWER, MULTIMEDIA, INPUT on the remote control and then the set will switch on.

Turning on the set (power cord is still connected)

If the set was turned off with the remote control power button and the ON/OFF (or r / I) button on the set.

•Press the ON/OFF (or r / I), INPUT SELECT button on the set or press the POWER, MULTIMEDIA, INPUT on the remote control and then the set will switch on.

NOTE

•If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

Volume Adjustment

1.Press the VOL F / G button to adjust the volume.

2.If you want to switch the sound off, press the MUTE button.

3.You can cancel this function by pressing the MUTE or VOL F / G button.

On-screen Menus Language Selection

-The menus can be shown on the screen in the selected language. First select your language.

1. Press the MENU button and then use D / E button to select the SPECIAL menu.

2. Press the G button and then use D / E button to select Language.

3. Press the G button and then use D / E button to select your desired language.

From this point on, the on-screen menus will be shown in the language of your choice.

4. Press the ENTER button to save.

SPECIALI

Input

Language G

Key lock ISM Method Low power Set ID Caption / Text Demo OSD Rotate

MENU Prev.

English

Español

Français

16 Plasma Monitor