LG Electronics 42PT200 owner manual HD Receiver Setup, Component Connection, How to connect

EXTERNAL EQUIPMENT SETUP

EXTERNAL EQUIPMENT SETUP

■To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

■Image shown may differ from your TV.

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

Component Connection
1. How to connect
	Y PBPR	L R
1	Connect the video outputs (Y, PB, PR) of the digital set-
	top box to the COMPONENT IN VIDEO 1 jacks on
	the TV. Match the jack colors (Y = green, PB = blue, and
	PR = red).
	1	2
2	Connect the audio output of the digital set-top box to
	the COMPONENT IN AUDIO 1 jacks on the TV.

O IN

			/DVI)	REMOTE	AV IN 1
2. How to use				CONTROL IN	/MONO AUDIO
				VIDEO
■ Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box. operation)				2
■ Select the Component1 input source on the TV using the					L	R
				1
INPUT button on the remote control.
				VIDEO	AUDIO	ANT
■ If connected to COMPONENT IN 2 input, select the
				COMPONENT IN		CA
Component2 input source on the TV.
Supported Resolutions			Y, CB/PB, CR/PR
Signal	Component	HDMI	Resolution	Horizontal	Vertical
				Frequency(KHz) Frequency(Hz)
480i	Yes	No
480p	Yes	Yes	720x480i	15.73	59.94
				15.73	60.00
720p	Yes	Yes
				31.47	59.94
1080i	Yes	Yes	720x480p
				31.47	60.00
1080p	Yes	Yes	1280x720p	44.96	59.94
				45.00	60.00
			1920x1080i	33.72	59.94
				33.75	60.00
				27.00	24.00
				33.75	30.00
			1920x1080p	67.432	59.939
				67.50	60.00
				26.97	23.94
				33.71	29.97

20