WATCHING TV / CHANNEL CONTROL
44

TURNING ON THE TV

WATCHING TV / CHANNEL CONTROL
NOTE
!
First, connect power cord correctly.
And switch the AACC ppoowweerr ccoonnttrrooll sswwiittcchhon TV (Except 32/42/47CL40, 42/47LU60).
At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the , IINNPPUUTT,CCHH((DDEEor )) button on the TV or press the
PPOOWWEERR, IINNPPUUTT, CCHH ((or )), NNuummbbeerr ((00~99))button on the remote control.
Select the viewing source by using the IINNPPUUTTbutton on the remote control.
This TV is programmed to remember which power state it was last set to, even if the power cord is out.
When finished using the TV, press the PPOOWWEERRbutton on the remote control. The TV reverts to standby
mode.
1
2
3
Press the CCHH((or ))or NNUUMMBBEERRbuttons to select a channel number.
1

VOLUME ADJUSTMENT

CHANNEL SELECTION

Press the VVOOLL((++ or --))button to adjust the volume.
If you want to switch the sound off, press the MMUUTTEEbutton.
You can cancel the Mute function by pressing the MMUUTTEEor VVOOLL((++ or --))
button.
Adjust the volume to suit your personal preference.
1
2
3
GGIf you intend to be away on vacation, disconnect the power plug from the wall power outlet.
GGIf you do not complete the IInniittiiaall sseettttiinngg, it will appear whenever the TV is switched on until the IInniittiiaall
sseettttiinngg procedure is completed.
GGIf the TV is unplugged once or turn off with the AC power control switch on the TV, reset the CClloocckkfunction.