23
ENG
ENGLISH
CUSTOMIZING SETTINGS
Setting Description
Tile Mode To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB Cable by distributor and RS-232C.
Tile mode and choose Tile alignment and set the ID of the current product to set location.
* Only after pressing the SET button the adjustments made to the settings will be saved.
- Tile mode : column x row ( c = 1, 2, 3, 4,5 r = 1, 2, 3, 4,5)
- 5 x 5 available.
- Configuration of an integration screen is available as well as configuration of One by one
Display.
Mode
H-Size Adjust the horizontal size of the screen taking into account the size of the
bezel.
V-Size Adjust the vertical size of the screen taking into account the size of the bezel.
H-Position Moving the screen position horizontally.
V-Position Moving the screen position vertically.
Reset Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns
to Full screen.
Tile ID Select the location of the Tile by setting an ID.
Natural The image is omitted by the distance between the screens to be naturally
shown.
Network Setup - DHCP : Allocates and sets up IP automatically.
- Manual : Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary DNS.
The setup process is complete when you select Execute, and "IP Setup Completed" is displayed
at the bottom of the screen. While "Wait for IP Setup" is displayed, you cannot use the local keys
and remote control. "Wait for IP Setup" is displayed for up to 40 seconds.
* If Network select is set to RS232C.DHCP and Manual are disabled.
Factory Reset Select this option to return to the default factory settings.