LG Electronics 47WV30-BAAM, 47WV30BS, 47WV30MS, 47WV30-BAAL, 47WV30BR owner manual Option settings

CUSTOMIZING SETTINGS 49

OPTION settings

1Press MENU to access the main menus.

2Press the Navigation buttons to scroll to OPTION and press OK.

3Press the Navigation buttons to scroll to the setting or

option you want and press OK.

- To return to the previous level, press BACK.

4When you are finished, press EXIT.

When you return to the previous menu, press BACK.

The available option settings are described in the following:

OPTION		Move	OK
	• Language		ꔋ
	• ISM Method	: Normal
	• DPM Select	: Off
	• Fail Over	: Off
	• Factory Reset
	• Set ID	: 1
	• Tile Mode
	• Portrait Mode

•Fan

•Product/Service Info.

ENGLISH

Setting		Description
Language	To choose the language in which the control names are displayed.
ISM Method	Leaving a fixed image on the screen for a long time may cause damage to the screen and cause
	image burn-in. To use the product for a long period of time, use a screen saver on the PC or utilize
	the residual image prevention function on the product, and when the product is not used, turn off
	the power. Burn-in and related problems are not covered by the warranty on this product.
	Setting
	Normal	Sets it if image sticking is never a problem
	Orbiter	May help prevent ghost images. However, it is best not to allow any fixed
		image to remain on the screen. To avoid a permanent image on the screen,
		the screen will move every 2 minutes.
	Inversion	This function inverts the panel color of the screen. The panel color is
		automatically inverted every 30 minutes.
	White wash	Removes a ghost image on the screen.
		Use sparingly. Watch the sets normally for a while before using this feature to
		see if the ghost image disappears on its own.
DPM Select	A user can choose to turn the power saving mode on / off.
Fail Over	If there is no input signal, it automatically switches to another input with signal.
	* 47WV30-BAAL does not support this function.
	Setting
	Off	Stops auto switch of the input source.
	Auto	Switches to another input source with video signal if no video signal comes
		from the current input source.
	Manual	Selects the priority of input source for auto switch.
		When several input sources are found, the input source with a higher priority
		will be selected.
Factory Reset	Select this option to return to the default factory settings.