112EXTERNAL CONTROL DEVICE SETUP
09. Tint (Command: k j) | 13. Treble (Command: k r) | |
►► To adjust the screen tint. | ►► To adjust treble. | |
You can also adjust tint in the PICTURE menu. | ||
You can also adjust treble in the AUDIO menu. | ||
|
ENGLISH
Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64
*Refer to ‘Real data mapping’. See p.114. Ack [j][ ][Set ID][ ][OK/NG][Data][x]
10.Sharpness (Command: k k)
►► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
*Refer to ‘Real data mapping’. See p.114.
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
►► To select OSD (On Screen Display) on/off when controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off | 01 : OSD on |
Ack [l][ ][Set ID][ ][OK/NG][Data][x]
12. Remote control lock mode (Command: k m)
►► To lock the front panel controls on the monitor and remote control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off | 01 : Lock on |
Ack [m][ ][Set ID][ ][OK/NG][Data][x]
*If you are not using the remote control, use this mode. When main power is on/off, external control lock is released.
*In the standby mode, if key lock is on, TV will not turn on by power on key of IR & Local Key.
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
*Refer to ‘Real data mapping’. See p.114. Ack [r][ ][Set ID][ ][OK/NG][Data][x]
14.Bass (Command: k s)
►► To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
*Refer to ‘Real data mapping’. See p.114.. Ack [s][ ][Set ID][ ][OK/NG][Data][x]
15.Balance (Command: k t)
►► To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
*Refer to ‘Real data mapping’. See p.114. Ack [t][ ][Set ID][ ][OK/NG][Data][x]
16.Colour Temperature (Command: x u)
►► To adjust colour temperature. You can also adjust Colour Temperature in the PICTURE menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
*Refer to ‘Real data mapping’. See p.114.
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
Downloaded From
