30
ENG
ENGLISH
WATCHINGTV
yy Acquired certification SO :
Sweden(Comhem, Canal Dig-
ital), Denmark(YouSee, Canal Dig-
ital, Stofa), Norway(Canal Digital),
Netherlands(Ziggo, UPC Digitaal),
Ukraine(Volia-Cable), Germany(KDG),
Switzerland(CableCom, UPC),
Austria(UPC Digital), Hungary(UPC Dig-
ital), Ireland(UPC Digital), Poland(UPC
Digital), Romania(UPC Digital),
Russia(OnLime).
yy If there are not any Service Operator
that you want, select OtherOperators.
yy If you select “OtherOperators”, or
the selected country supports “Other
Operators” only, it may take some time
to search all the channels, or it may not
search some of the channels.
The following values are needed in order to search
all available programmes quickly and correctly.
The commonly used values are provided as "de-
fault".
However, for correct settings, please inquire of the
cable service provider.
When running AutoTuning in DVB cable mode,
selecting Full will search through all frequencies to
find available channels.
In the case when the programme is not searched
by selecting the Default, perform the searching by
selecting the Full.
However, in the case when the programme is
searched by selecting the Full, the Auto Tuning
time can be taken too much.
•
Frequency : Enter a user-defined frequency.
• Symbolrate : Enter a user-defined symbol rate
(Symbol rate: Speed at which a device such as
modem sends symbols to a channel).
• Modulation : Enter a user-defined modulation.
(Modulation: Loading of audio or video signals
onto carrier).
•NetworkID : Unique identifier allocated for
each user.
• StartFrequency : Enter a user-defined start
frequency range.
• EndFrequency : Enter a user-defined end
frequency range.
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to
SETUP and press OK.
3 Press the Navigation buttons to scroll to
SETUP and press OK.
4 Press the Navigation buttons to scroll to
AutoTuning and press OK.
5 Press the Navigation buttons to scroll to
Satellite and press OK.
6 Press the Navigation buttons to scroll make
appropriate adjustments and press OK.
7 Select Start to start automatic tuning.
The TV scans and saves available pro-
grammes automatically.
8 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
SelectingSatellite,
NOTE
yy ProgrammeType : You can select All
Programmes,FTAProgramme or Paid
Programme.
yy NetworkSearch : You can search through
both an existing TransponderList and the
TransponderList that was transmitted via
NIT.
yy You can change the SettingIDInfo from the
Setting menu.
yy You can Add/Delete the SettingID from the
SETUP->SatelliteDTVSetting menu.
yy If more than 6000 programmes are stored,
you cannot store any more programmes. To
add programmes, delete the unused setting
IDs in SETUP -> SatelliteDTVSetting and
tune the TV again.
(Only Satellite models)
Downloaded From TV-Manual.com Manuals