103
APPENDIX
PROGRAMMING CODEPROGRAMMING THE REMOTE CONTROL

Programming a code into a remote mode

Testing your remote control.
To find out whether your remote control can operate other components without programming, turn on a
component such as a VCR and press the corresponding mode button (such as a DDVVDDor VVCCRR) on the
remote control, while pointing at the component. Test the PPOOWWEERRand PPRR ++ // --buttons to see if the
component responds correctly. If the component does not operate correctly, the remote control requires
programming to operate the device.
Switch on the component to be programmed, then press the corresponding mode button (such as DDVVDDor
VVCCRR) on the remote control. The remote control button of the desired device is illumintated.
Press the MMEENNUUand MMUUTTEEbuttons simultaneously, the remote control is ready to be programmed with
the code.
Enter a code number using the number buttons on the remote control.
Programming code numbers for the corresponding component can be found on the following pages. If the
code is correct, the device will turn off.
Press the MMEENNUUbutton to store the code.
Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.
The remote control is a multi brand or universal remote. It can be programmed. to operate most remote
controlled devices from other manufacturers.
Note that the remote control may not control all models from other brands.
1
2
3
4
5
6
Brand Codes Brand Codes Brand Codes

DVD

APEX DIGITAL 022
DENON 020 014
GE005006
HARMAN KARDON 027
JVC 012
LG 001 010 016 025
MAGNAVOX 013
MARANTZ 024
MITSUBISHI 002
NAD 023
ONKYO 008 017
PANASONIC 003 009
PHILIPS 013
PIONEER 004 026
PROCEED 021
PROSCAN 005 006
RCA 005 006
SAMSUNG 011 015
SONY 007
THOMPSON 005 006
TOSHIBA 019 008
YAMAHA 009 018
ZENITH 010 016 025
Downloaded From TV-Manual.com Manuals