5. Factory Adjustment

PU11A / PB11A : USE INTERNAL ADC(S7R) : using internal
pattern.

5-1. Auto Adjust Component

480i/1080p RGB 1080p

(1) Summary : Adjustment component 480i/1080i and RGB
1080p is Gain and Black level setting at Analog
to Digital converter, and compensate the RGB
deviation
(2) Using instrument
1) Adjustment remocon, 801GF(802B, 802F, 802R) or
MSPG925FA pattern generator
(It can output 480i/1080i horizontal 100 % color bar
pattern signal, and its output level must setting
0.7 V ± 0.1 V p-p correctly)
* You must make it sure its resolution and pattern cause every
instrument can have different setting
2) Adjustment method 480i Comp1, Adjust 1080p
Comp1/RGB (Factory adjustment)
O ADC 480i Component1 adjustment -
- Check connection of Component1
- MSPG-925FA Ë Model: 209, Pattern 65
OSet Component 480i mode and 100% Horizontal
Color Bar Pattern(HozTV31Bar), then set TV set to
Component1 mode and its screen to “NORMAL”
OADC 1080p Component1 / RGB adjustment
- Check connection both of Component1 and RGB
- MSPG-925FA Ë Model: 225, Pattern 65
OSet Component 1080p mode and 100% Horizontal
Color Bar Pattern(HozTV31Bar), then set TV set to
Component1 mode and its screen to “NORMAL”
OAfter get each the signal, wait more a second and
enter the “IN-START” with press IN-START key of
Service remocon. After then select “7. External ADC”
with navigator button and press “Enter”.
OAfter Then Press key of Service remocon “Right
Arrow(VOL+)”
OYou can see “ADC Component1 Success”
OComponent1 1080p, RGB 1080p Adjust is same
method.
OComponent 1080p Adjustment in Component1 input
mode
ORGB 1080p adjustment in RGB input mode
OIf you success RGB 1080p Adjust. You can see “ADC
RGB-DTV Success”
Caution : Set Volume 0 after adjustment

5-2. Use Internal ADC(S7R)

- ADJ(EZ ADJUST) -> 6.ADC Calibration -> ADC
Calibration(START)

5-3. EDID(The Extended Display

Identification Data) / DDC(Display Data

Channel) download

(1) Summary
1) It is established in VESA, for communication between
PC and Monitor without order from user for building user
condition. It helps to make easily use realize “Plug and
Play” function.
2) For EDID data write, we use DDC2B protocol.

5-4. Auto Download

(1) After enter Service Mode by pushing “ADJ” key,
(2) Enter EDID D/L mode.
(3) Enter “START” by pushing “OK” key.
Caution
- Never connect HDMI & D-sub Cable when the user
downloading .
- Use the proper cables below for EDID Writing.
O It only needs to PCM EDID D/L for North America Product.
(PU11A)
- 7 - LGE Internal Use OnlyCopyright ©2011 LG Electronics Inc. All rights reserved.
Only for training and service purposes
< Adjustment pattern : 480i / 1080p 60Hz Pattern >