LG Electronics 50PX4DRH VCR Setup, Analog and Digital TV signals provided on cable and antenna

Installation

3. Analog and Digital TV signals provided on cable and antenna

Antenna

Cable TV Wall Jack

Bronze Wire

RF Coaxial Wire (75 ohm)

Turn clockwise to tighten.

RF Coaxial Wire (75 ohm)

Bronze Wire

CABLE ANTENNA

AC INPUT

ANTENNA

•To improve the picture quality in a poor signal area,

please purchase a signal amplifier and install properly.

• If the antenna needs to be split for two TV’s, install a “2- Way Signal Splitter” in the connections.

• If the antenna is not installed properly, contact your deal- er for assistance.

Signal

Amplifier

Note: The TV will let you know when the analog, cable, and digital channel scans are complete.

VCR Setup

-To avoid picture noise (interference), leave an adequate distance between the VCR and TV

-Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.

Connection Option 1

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

Connection Option 2

1.Connect the audio and video cables from the VCR's output jacks to the TV input jacks, as shown in the figure.

When connecting the TV to VCR, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

If you connect an S-VIDEO output from VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input.

2.Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

3.Select the input source with using the TV/VIDEO button on the remote control. (If connected to A/V INPUT , select Video input source)

Do not connect to both Video and

S-Video at the same time.

VIDEO		AUDIO		VIDEO AUDIO
	L		R		L	R
COMPONENT INPUT 2					MONITOR OUTPUT

		DVD	REMOTE	CABLE	ANTENNA
		/DTV
RGB INPUT	AUDIO	INPUT	CONTROL		AC INPUT
	INPUT		(MONO)

COMPONENT INPUT 1 A/V INPUT S-VIDEO

1 2

ANT OUT
S-VIDEO	VCR Rear
	OUT
ANT IN

OUTPUT		(R) AUDIO (L)	VIDEO
SWITCH
3	4	IN

20 Plasma TV