External Control Device Setup
09. Color (Command2:i)
G To adjust the screen color.
You can also adjust color in the Video menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
•Refer to ‘Real data mapping’. See page 119. Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command2:j)
G To adjust the screen tint.
You can also adjust tint in the Video menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64
•Refer to ‘Real data mapping’. See page 119.
Acknowledgement
[ j ][ ][Set ID][ ][OK/NG][Data][x]
11. Sharpness (Command2:k)
G To adjust the screen sharpness.
You can also adjust sharpness in the Video menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
•Refer to ‘Real data mapping’. See page 119. Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
12. OSD Select (Command2:l)
G To select OSD (On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off | 1: OSD on |
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
13. Remote Control Lock Mode (Command2:m)
G To lock the remote control and the front panel controls on the set.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0: Lock off | 1: Lock on |
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
GIf you’re not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released.
14. PIP / POP / Twin Picture (Command2:n)
GTo control the PIP
Transmission
[k][n][ | ][Set ID][ | ][Data][Cr] |
|
|
|
|
|
Data | 0:Off | 2: DW1 | |
| 1: PIP | 5: POP4(POP Scan) | |
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
15. PIP Position (Command2:q)
GTo select sub picture position for PIP.
Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data 0: Right down on screen
1:Left down on screen
2:Left up on screen
3:Right up on screen
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
16. Treble (Command2:r)
G To adjust treble.
You can also adjust treble in the Audio menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code)
•Refer to ‘Real data mapping’. See page 119. Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
17. Bass (Command2:s)
G To adjust bass.
You can also adjust bass in the Audio menu.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code)
•Refer to ‘Real data mapping’. See page 119. Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
18. Balance (Command2:t)
G To adjust balance.
You can also adjust balance in the Audio menu.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code)
•Refer to ‘Real data mapping’. See page 119. Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
120 Plasma TV
