SOUND & LANGUAGE CONTROL
100
SOUND & LANGUAGE CONTROL
NICAM Reception (In Analogue Mode Only)
When NICAM mono is received, you can select NNIICCAAMM MMOONNOOor FFMM MMOONNOO.
When NICAM stereois received, you can select NNIICCAAMM SSTTEERREEOOor FFMM MMOONNOO.
If the stereo signal is weak, switch to FFMM MMOONNOO.
When NICAM dual is received, you can select NNIICCAAMM DDUUAALL II, NNIICCAAMM DDUUAALL IIIIor
NNIICCAAMM DDUUAALL II++IIIIor FFMMMMOONNOO.
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
Speaker Sound Output Selection
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loud-
speakers.
Select the sound output.
LL++RR::Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio
R input is sent to the right loudspeaker.
LL++LL:: Audio signal from audio L input is sent to left and right loudspeakers.
RR++RR::Audio signal from audio R input is sent to left and right loudspeakers.
1
2
3
Ofrecido por www.electromanuales.com
Downloaded From TV-Manual.com Manuals