APPENDIX
1122.. RReemmoottee ccoonnttrrooll lloocckk mmooddee((CCoommmmaanndd:: kkmm))
GTo lock the front panel controls on the monitor and
remote control.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Ack
Data 00 : Lock off 01: Lock on
* If you are not using the remote control, use this mode.
When main power is on/off, external control lock is
released.
[m][ ][Set ID][ ][OK/NG][Data][x]
1111.. OOSSDD SSeelleecctt ((CCoommmmaanndd:: kkll))
GTo select OSD (On Screen Display) on/off when con-
trolling remotely.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Ack
Data00 : OSD off 01: OSD on
[l][ ][Set ID][ ][OK/NG][Data][x]
0099.. TTiinntt ((CCoommmmaanndd:: kkjj))
GTo adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission
Data Red : 00 ~Green : 64
* Refer to ‘Real data mapping 1’. See page 128.
[k][j][ ][Set ID][ ][Data][Cr]
Ack
[j][ ][Set ID][ ][OK/NG][Data][x]
GTo adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
1100.. SShhaarrppnneessss ((CCoommmmaanndd:: kkkk))
Data Min : 00 ~Max : 64
* Refer to ‘Real data mapping 1’. See page 128.
[k][k][ ][Set ID][ ][Data][Cr]
Ack
[k][ ][Set ID][ ][OK/NG][Data][x]
1133.. BBaallaannccee ((CCoommmmaanndd:: kktt))
GTo adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission
Data Min : 00 ~Max : 64
* Refer to ‘Real data mapping 1’. See page 128.
[k][t][ ][Set ID][ ][Data][Cr]
Ack
[t][ ][Set ID][ ][OK/NG][Data][x]
1144.. CCoolloouurr TTeemmppeerraattuurree ((CCoommmmaanndd:: kkuu))
GTo adjust colour temperature. You can also adjust Colour
Temperature in the PICTURE menu.
Transmission
Data 00: Medium 01:Cool 02: Warm
[k][u][ ][Set ID][ ][Data][Cr]
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
127
1155.. AAbbnnoorrmmaall SSttaattee ((CCoommmmaanndd:: kkzz))
GTo recognize an abnormal state.
Transmission
Data FF : Read
Data 00: Normal (Power on and signal exist)
01: No signal (Power on)
02: Turn the TV off by remote control
03: Turn the TV off by sleep time function
04: Turn the TV off by RS-232C function
05: 5V down
06: AC down
07: Turn the TV off by Fan Alarm function
08: Turn the TV off by Off time function
09: Turn the TV off by Auto sleep function
a: Turn the TV off by AV board detection.
* This function is “read only”.
[k][z][ ][Set ID][ ][FF][ ][Cr]
Ack
[z][ ][Set ID][ ][OK/NG][Data][x]
1166.. IISSMM MMeetthhoodd ((PPllaassmmaa TTVV oonnllyy))
((CCoommmmaanndd:: jjpp))
GTo control the ISM method. You can also adjust ISM
Method in OPTION menu.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Ack
[p][ ][Set ID][ ][OK/NG][Data][x]
Data 01: Inversion
02: Orbiter
04: White wash
08: Normal
Ofrecido por www.electromanuales.com
Downloaded From TV-Manual.com Manuals