32EXTERNAL CONTROL DEVICE SETUP
ENGLISH
12. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
13. Remote Control Lock Mode (Command: k m)
To lock the remote control and the front panel controls on the set.
Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00: Lock off Data 01: Lock on
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If you’re not using the remote control and front panel controls on the Monitor set, use this mode. When main power is on/off, remote control lock is released.
If Key Lock is on in the standby mode, TV will not turn on by POWER button of remote control and on the TV.
14.Treble (Command: k r) To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to “Real data mapping”.
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
15.Bass (Command: k s) To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to “Real data mapping”.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
16.Balance (Command: k t) To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to “Real data mapping”.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
17.3D (Command: x t) (For 3D TV) To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data01] [ ][Data02][ ][Data03][ ][Data04][Cr]
Data01 |
|
00: 3D On | 01: 3D Off |
02: 3D to 2D | 03: 2D to 3D |
Data02 |
|
00: Top and Bottom | 01: Side by Side |
02: Check Board | 03: Frame Sequential |
Data03 |
|
00: Right to Left |
|
01: Left to Right |
|
Data04 |
|
3D Depth: Min : 00 ~ Max : 14 (*transmit by Hexadecimal code)
*If data01 is 00(3D On), data04 has no meaning.
*If data01 is 01(3D Off) or 02(3D to 2D), data02, data03 and data04 have no meaning.
*If data1 is 03(2D to 3D), data2 has no meaning.
Data 01 | Data 02 | Data 03 | Data 04 |
00 | o | o | x |
01 | x | x | x |
02 | x | x | x |
03 | x | o | o |
x : Don’t care
Acknowledgement [t][ ][OK][Data01][Data02] [Data03][Data04][x][t][ ][NG][Data01][x]
18.Color Temperature (Command: x u) To adjust color temperature.
You can also adjust color temperature in the PICTURE menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to “Real data mapping”. Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
19.Extended 3D (Command: x v) (For 3D TV)
To change 3D option for TV.
Transmission [x][v][ ][Set ID][ ][Data01][ ][Data02][Cr] Data01: 3D option
00: 3D Picture Correction
01:3D Depth (2D to 3D Only)
02:3D Viewpoint
03:3D Picture Size
04:3D Picture Balance
05:3D Optimization
Data02: It has own range for each 3D option
determined by Data1. |
| |
1) | When Data1 is 00 |
|
| 00: Right to Left | 01: Left to Right |
2) | When Data1 is 01, 02 |
|
Data Min: 00 ~ Max: 14 (*transmit by Hexadecimal
code) |
|
3) When Data1 is 03 |
|
00: Just Scan | 01: 16:9 |
4) When Data1 is 04 |
|
00: Off | 01: On |
5) When Data1 is 05
Data Min: 00 ~ Max: 02 (*transmit by Hexadecimal code)
Acknowledgement [v][ ][OK][Data01][Data02][x] [v][ ][NG][Data01][x]
* Use the feature depending on your model.
