14ASSEMBLING AND PREPARING
Mounting on a table
1Lift and tilt the TV into its upright position on a table.
-Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation.
| 10 cm |
|
| (4 inches) |
|
10 cm | 10 | cm |
| ||
|
| |
| 10 cm | |
2 Connect the power cord to a wall outlet.
CAUTION
yyDo not place the TV near or on sources of heat, as this may result in fire or other damage.
ENGLISH |
|
|
|
| Securing the TV to a table |
| |
|
|
| |
| (For 32/39/42/47/50/60LN5700, 32LN570B, | ||
| 32/39/42/47/50/60LN5750, 47LN5790) | ||
| Fix the TV to a table to prevent from tilting forward, | ||
| damage, and potential injury. | ||
| Mount the TV on a table, and then insert and tighten the | ||
| supplied screw on the rear of the stand. | ||
WARNING
yyTo prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.
Using the Kensington security system (optional)
(Depending on model)
The Kensington security system connector is located at the rear of the TV.
For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.
Connect the Kensington security system cable between the TV and a table.
NOTE
yyThe Kensington security system is optional. You can obtain additional accessories from your local dealer.
