10EXTERNAL CONTROL DEVICE SETUP

ENGLISH

[Data 01][Data 02]: Major Channel Number

Data 01: High byte Channel Data

Data 02: Low byte Channel Data

- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)

[Data 03][Data 04]: Minor/Branch Channel Number (Don’t care in Satellite)

Data 03: High byte Channel Data

Data 04: Low byte Channel Data

Data 05 : Input Source (Digital/Satellite for Japan)

-02 : Terrestrial TV (DTV)

-07 : BS (Broadcasting Satellite)

-08 : CS1 (Communication Satellite 1)

-09 : CS2 (Communication Satellite 2) * Tune Command Examples:

1Tune to the digital terrestrial (ISDB-T) channel 17-1. Set ID = All = 00

Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 17 = 00 11 Data 03 & 04 = Minor/Branch is 1 = 00 01 Data 05 = Digital Terrestrial TV = 02 Total = ma 00 00 00 11 00 01 02

2.Tune to the BS (ISDB-BS) channel 30. Set ID = All = 00

Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Don’t Care = 00 00 Data 05 = Digital BS TV = 07 Total = ma 00 00 00 1E 00 00 07

*This feature is varied based on the model. Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x]

18.Channel(Programme) Add/Del(Skip) (Command: m b)

►►To skip current channel(programme) for next time. Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 00 : Del(ATSC,ISDB)/Skip(DVB) 01 : Add

Ack [b][ ][Set ID][ ][OK/NG][Data][x]

*Set the saved channel status to del(ATSC, ISDB)/ skip(DVB) or add.

19.Key (Command: m c) ►►To send IR remote key code.

Transmission [m][c][ ][Set ID][ ][Data][Cr]

Data Key code - p.2.

Ack [c][ ][Set ID][ ][OK/NG][Data][x]

20. Control Back Light (Command: m g)

For LCD TV / LED TV ►►To control the back light.

Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [g][ ][Set ID][ ][OK/NG][Data][x]

Control Panel Light (Command: m g)

For Plasma TV

►►To control the panel light.

Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [g][ ][Set ID][ ][OK/NG][Data][x]

21.Input select (Command: x b) (Main Picture Input)

►►To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr]

Data

 

 

 

00

: DTV

01

: CADTV

02

: Satellite DTV

10

: ATV

 

ISDB-BS (Japan)

 

 

03

: ISDB-CS1 (Japan)

 

 

04

: ISDB-CS2 (Japan)

 

 

11 : CATV

 

 

20

: AV or AV1

21

: AV2

40

: Component1

41

: Component2

90

: HDMI1

91

: HDMI2

92

: HDMI3

93

: HDMI4

Ack [b][ ][Set ID][ ][OK/NG][Data][x]

* This function depends on model and signal.

Page 50
Image 50
LG Electronics 55LN5700, 60LN5750, 60LN5700 ChannelProgramme Add/DelSkip Command m b, Control Back Light Command m g