LG Electronics 50PA6500, 60PA550C, 60PA6550, 50PA4500, 42PA450C Press the Touch Home button, Power

PENTOUCH 37

Pairing for the First Time Caution When Unpairing

1Check that the LED indicator on the dongle connected to the computer is red.

2Keep the touch pen within 30 cm (12 inches) of the dongle.

3Press the (POWER) button on the touch pen once.

4The LED indicator on the touch pen will red for 2 seconds and blinks green 3 times when pairing is complete.

5If the LED indicator is red for 4 - 5 seconds and blinks red 3 times, pairing is not successful. Please try pairing again.

6Once a pen is paired, the red LED blinks once when you press the Touch Home button.

When Pairing Fails

1Pairing fails if the dongle driver is not installed on the computer.

2Pairing fails if the LED indicator on the dongle is not red.

3Remove the dongle from the PC, reinsert it and try pairing.

Unpairing (Resetting the touch pen)

1Press the Touch Home button on the touch pen and check that the red LED blinks once.

2Press the Touch Home button and the

(POWER)

button together, regardless of sequence, for more than 4 seconds.

3If you release the buttons after 4 seconds, the pen will be reset. The red LED will blink three times and the pen will be turned off.

1Be careful not to unpair the pen by mistake. If unpaired, try pairing it again.

2If you unpair and pair a normally functioning touch pen, the other paired pen may not work. In this case, unpair the nonfunctioning touch pen and pair it again by following the steps described in the Pairing for the First Time section.

Touch pen Operation

Once paired, you can use the touch pen in the following ways.

1Powering on

-Press the (POWER) button once. The red and green LEDs will remain lit to indicate that the power is on.

Powering off

-Press the (POWER) button for more than 3 seconds and release it. The red LED will blink 3 times and the pen will be turned off.

2Pressing the Touch Home button while using the touch pen

-In the Pentouch program: Shows or hides the toolbar of the feature.

-In Windows: Works in the same way as the right-click function.

Point the touch pen at an object you want to right-click, then press the button.

3The double-click function may not work as intended in Windows XP or Windows Vista.

If this is the case, use the Touch Home button (right-click) instead.

4The touch pen works in the same way as a mouse in Windows.

ENGLISH