LG Electronics 60PG30C, 42PG20C, 50PG30C Command Reference List, Transmission / Receiving Protocol

APPENDIX

Command Reference List

	COMMAND1	COMMAND2	DATA				COMMAND1 COMMAND2			DATA
			(Hexadecimal)							(Hexadecimal)
			00 ~ 01							00 ~ 64
01. Power	k	a			14. Treble			k	r
02. Input Select	x	b	(G p.95)		15. Bass			k	s	00 ~ 64
03. Aspect Ratio	k	c	(G p.95)		16. Balance			k	t	00 ~ 64
04. Screen Mute	k	d	00 ~ 01			17. Color Temperature		k	u	00 ~ 02
05. Volume Mute	k	e	00 ~ 01		18. ISM Method			j	p	(G p.96)
06. Volume Control	k	f	00 ~ 64		19. Power Saving			j	q	00 ~ 01
07. Contrast	k	g	00 ~ 64		20. Auto Configuration			j	u	(G p.96)
08. Brightness	k	h	00 ~ 64		22. Channel Add/Del			m	b	00 ~ 01
09. Color	k	i	00 ~ 64		23. Key			m	c	(G p.97)
10. Tint	k	j	00 ~ 64
11. Sharpness	k	k	00 ~ 64
12. OSD Select	k	l	00 ~ 01
13. Remote Control	k	m	00 ~ 01
Lock Mode
	COMMAND1	COMMAND2	DATA00			DATA01	DATA02	DATA03	DATA04	DATA05
			(Hexadecimal)	(Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal)
			physical			major	major low	minor high	minor low	attribute
21. Channel Tuning	m	a
			program high	program low

APPENDIX

Transmission / Receiving Protocol

Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr]

[Command 1] : First command to control the set.(j, k, m or x)

[Command 2] : Second command to control the set.

[Set ID] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustment range is 1~ 99. When selecting Set ID ‘0’, every connected the TV is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~0x63) on transmission /receiving protocol.

[DATA] : To transmit the command data.

Transmit the ‘FF’ data to read status of command. [Cr] : Carriage Return

ASCII code ‘0x0D’

[ ] : ASCII code ‘space (0x20)’

* In this model, TV will not send the status during the standby mode.

OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x]

The TV transmits ACK (acknowledgement) based on this for- mat when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

*In this model, TV will not send the status during the standby mode.

*Data Format

[Command 2] : Use as command.

[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.

[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.

[OK] : Use the large character.

Error Acknowledgement

[Command2][ ][Set ID][ ][NG][Data][x]

The TV transmits ACK (acknowledgement) based on this for- mat when receiving abnormal data from non-viable functions or communication errors.

Data1: Illegal Code

Data2: Not supported function

Data3: Wait more time

*In this model, TV will not send the status during the standby mode.

*Data Format

[Command 2] : Use as command.

[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.

[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.

[NG] : Use the large character

94