ASSEMBLING AND PREPARING 23
Lifting and moving the TV
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless of
its type and size.
-_ CAUTION
, Avoid touching the screen at alltimes, as
this may result in damage to the screen.
*It is recommended to move the TV in the
box or packing material that the TVoriginally
came in.
*Before moving or lifting the TV, disconnect
the power cord and all cables.
*When holding the TV, the screen should face
away from you to avoid damage.
*Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
*When transporting a large TV, there should
be at least 2 people.
*When transporting the TV by hand, hold the
TV as shown in the following illustration.

Setting up the TV

Put your TV ona pedestal stand and mount the TV
on a table orwall.

Attaching the stand

If you are not mounting the TV to awall, use the
following instructions to attach the stand.
Lay the TV with the screen side down on aflat
surface.
CAUTION
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage. Make sure noobjects press
against the screen.
Assemble the parts of the stand body with the
stand base of the TV.
Mode_ ScreWfor Number of
assembly screws
50PZ750, M5 x 14.5 3
50PZ950,
50PZ950U
60PZ750, M5 x 14.5 4
60PZ950,
60PZ950U
Stand Body
Stand Base
*When transporting the TV, do not expose the
TV to jolts orexcessive vibration.
*When transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
Stand Bocly
Stand Base
Downloaded From TV-Manual.com Manuals