22Installation
Wireless Network Connection
Another connection option is to use an Access Point or a wireless router. In the example confi guration for wireless connection below, this player would be able to access content from either of the PCs.
The network confi guration and connection method may vary depending on the equipment in use and the network environment.
| This player is equipped with an IEEE 802.11n | |
| (2.4 GHz band only) wireless module, which | |
3 | also supports the 802.11b/g standards. For the | |
Installation | best wireless performance, we recommend | |
using a IEEE 802.11n certifi ed | ||
| ||
| (access point or wireless router). | |
| Available WiFi standards: | |
| 802.11b / 802.11g / 802.11n | |
| 2.4 GHz) |
Wireless Network Connection | |
BD Player |
|
Wireless | |
Communication | |
| PC |
| Access Point or |
| Wireless Router |
WAN |
|
| Broadband |
| service |
22 |
Refer to the setup instructions supplied with your access point or wireless router for detailed connection steps and network settings.
NOTE
For best performance, a direct wired connection from this player to your home network’s router or cable/DSL modem is always the best option. If the player is far away from your router or cable/DSL modem, Ethernet or LAN cables are available at many stores in lengths of 50 feet and longer. If you do chose to use the wireless option, note that performance can sometimes be affected by other electronic devices in the home.
Wireless Network Setup
For the wireless network connection, the player needs to be set up for network communication. This adjustment can be done from the [Setup] menu. Adjust the [NETWORK] setting as follow. Setting up the access point or the wireless router is required before connecting the player to the network.
Preparation
Before setting the wireless network, you need to:
-connect the broadband internet to the wireless home network.
-set the access point or wireless router.
-note the SSID and security code of the network.
1.Select [Connection Setting] option in the [Setup] menu then press ENTER ().
2010.2.1 4:43:1 PM