LG Electronics BD570 LOCK Menu, Sampling Freq Digital Audio Output, DRC Dynamic Range Control

30Installation

3

Installation

NOTE

•When [HDMI] option is set to [PCM Multi-Ch], the audio may output as PCM Stereo if the PCM Multi-Ch information is not detected from HDMI device with EDID.

•If the [HDMI] or [Digital Output (SPDIF)] option is set to [DTS Re-Encode], the DTS Re-Encode audio is outputted for BD-ROM discs with secondary audio and the original audio is outputted for the other discs (like [Primary Pass- Thru]).

Sampling Freq.

(Digital Audio Output)

[192 kHz]

Select this if your A/V Receiver or Amplifi er is capable of handling 192 kHz signals.

[96 kHz]

Select this if your A/V Receiver or Amplifi er is not capable of handling 192 kHz signals. When this choice is made, this unit automatically converts any 192 kHz signals to 96 kHz so your system can decode them.

[48 kHz]

Select this if your A/V Receiver or Amplifi er is not capable of handling 192 kHz and 96 kHz signal. When this choice is made, this unit automatically converts any 192 kHz and 96 kHz signals to 48 kHz so your system can decode them.

Check the documentation for your A/V Receiver or Amplifi er to verify its capabilities.

DRC (Dynamic Range Control)

When a content encoded in Dolby Digital or Dolby Digital Plus is playing back, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound. Set [DRC] to [On] for this effect.

NOTE

The DRC setting can be changed only when a disc is not inserted or the unit is in complete stop mode.

[LOCK] Menu

The [LOCK] settings affect only CinemaNow movie, BD and DVD playback.

To access the any features in [LOCK] settings, you must enter the 4-digit security code you have created.

If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password twice, and press ENTER () to create a new password.

Password

You can create or change the password.

[None]

Enter a 4-digit password twice, and press ENTER () to create a new password.

[Change]

Enter the current password and press ENTER (). Enter a 4-digit password twice, and press ENTER () to create a new password.

BD572-N-BUSALLK-ENG.indd 30 2010.2.1 4:43:3 PM