5 Troubleshooting
Troubleshooting 41
Troubleshooting
5
Troubleshooting

General

Symptom Cause & Solution
The Power does not turned on.
yPlug the power cord into the wall outlet securely.
The unit does not start
playback.
yInsert a playable disc. (Check the disc type, colour system, and
regional code.)
yPlace the disc with the playback side down.
yPlace the disc on the disc tray correctly inside the guide.
yClean the disc.
yCancel the Rating function or change the rating level.
The angle cannot be changed.
yMulti-angles are not recorded on the DVD Video being played.
Cannot play movie, photo or
music les.
yThe les are not recorded in a format that the unit can play.
yThe unit does not support the codec of the movie le.
The remote control does not
work properly.
yThe remote control is not pointed at the remote sensor of the unit.
yThe remote control is too far from the unit.
yThere is an obstacle in the path of the remote control and the unit.
yThe batteries in the remote control are exhausted.
The unit is plugged in, but the
power will not turn on or o.
You can reset the unit as follows.
yUnplug the power cord, wait at least ve seconds, and then plug it in
again.
The unit is not operating
normally.