20Connecting
2
Connecting
,,Note
yy When plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock.
yy Do not connect a modular phone cable to the LAN port.
yy Since there are various connection configurations, please follow the specifications of your telecommunication carrier or internet service provider.
yy If you want to access content from PCs
or DLNA servers, this player must be connected to the same local area network with them via a router.
Broadband service
Router
PC and/or DLNA certified server
Rear of the unit
Wired Network Setup
If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow.
Preparation
Before setting the wired network, you need to connect the broadband internet to your home network.
1.Select [Connection Setting] option in the [Setup] menu then press ENTER (b).
2.Select [Yes] and press ENTER (b) to continue. The new connection settings reset the current network settings.
3.Use W/S/A/Dto select the IP mode between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP address automatically.
,,Note
If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/A/Dand numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part.
