Connecting 17
Resolution setting
The player provides several output resolutions for HDMI OUT jack. You can change the resolution using [Setup] menu.
1.Press HOME (n).
2.Use a/dto select the [Setup] and press ENTER (b). The [Setup] menu appears.
3.Use w/sto select [DISPLAY] option then press dto move to the second level.
4.Use w/sto select the [Resolution] option then press ENTER (b) to move to the third level.
5.Use w/sto select the desired resolution then press ENTER (b) to confirm your selection.
,,Note
yy If your TV does not accept the resolution you have set on the player, you can set resolution to 480p as follows:
1. Press Bto open the disc tray.
2 Press Z(STOP) for more than 5 seconds.
yy When you set the resolution to 480i with HDMI connection, actual resolution is outputted to 480p.
yy If you select a resolution manually and then
connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto].
yy If you select a resolution that your TV does not accept, the warning message will appear. After resolution change,
if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution.
yy The 1080p video output frame rate may be automatically set to either 24 Hz or
60 Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the
2
