Connecting 19
Connecting to an amplifier via digital audio output
Connect the player’s COAXIAL OUT jack to the corresponding in jack on your amplifier using an optional digital audio cable.
Rear of the unit
Coaxial cable
Receiver/amplifier
You will need to activate the player’s digital output. (See “[AUDIO] Menu” on pages 29.)
Connecting to your home network
This player can be connected to a local area network (LAN) via the LAN port on the rear panel or the internal wireless module.
By connecting the unit to a broadband home network, you have access to services such as software updates,
Wired network connection
Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference.
Please refer to the documentation for your network device for further instructions.
Connect the player’s LAN port to the corresponding port on your Modem or Router using a commercially available LAN or Ethernet cable.
,,Note
yy When plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock.
yy Do not connect a modular phone cable to the LAN port.
yy Since there are various connection configurations, please follow the specifications of your telecommunication carrier or internet service provider.
2
