and Specifications
Installation and
Safety Guidelines Installation, Wiring,
2–8 Installation, Wiring, and Specifications
Functional Specifications
Item Specification
CPU Intel CeleronR 566MHz processor
Replaceable with Socket 370 Pentium R III or CeleronR
Processors up to 850MHz
BIOS AWARD: Flash BIOS, Plug & Play supported, 2Mbit
Chip Set Intel R 82440BX
Main Memory 168-pin DIMM slot x 3, Max. 768MB SDRAM
One stick 128MB pre-installed; 16, 32, 64, 128, or 256MB
DIMMs are available (use PC100–compliant)
Cache 128 KB on CPU L2
Video Port ATI: 3D Rage Pro Turbo VGA controller, Display memory
4MB
Max: 1280 x 1024, 24 bit colors
Max: 1152 x 864, 32 bit colors
15 pin VGA connector
Keyboard/Mouse Port PC/AT keyboard supported (Mini DIN 6-pin)
D4-470 comes with Y-adapter cable (Mini DIN 6-pin to DIN
5-pin + Mini DIN 6-pin)
A keyboard and mouse can be used simultaneously with this
adapter
FDD 3.5” FDD (1.44MB/720KB) x 1
IDE HD Interface 2.5” HD bay x 2 (One bay has a 6.0GB HD, the other bay is
unoccupied)
The height of HD must be less than 9.5mm
Transfer speed: 16.67 MB/sec (PIO transfer mode 4)
33MB/sec (Ultra DMA/33 transfer )
Serial Port 2 Ports
COM1, 2: RS-232C, 9-pin D-sub connector
16C550 compatible UART
Max. 115.2kbps
Parallel Port 1 Port
25-pin D-sub connector
This port supports the following modes:
SPP (Standard Parallel Port)
EPP (Enhanced Parallel Port)
ECP (Extended Capabilities Port)
LAN Port 1 Port
RJ–45 connector
Chipset: Intel 82558
Supports 10/100 Base–T Ethernet networking
SCSI port Not Supported– No SCSI Interface on CPU–board