Part
Stacking Kit Installation Instructions
To ensure safe and secure installation, please observe the instructions below.
!WARNING!
Incorrect Installation can cause serious accidents.
The weight of the dryer and the height of installation makes the stacking procedure too risky for one person. This procedure should be performed by 2 or more experienced service personnel.
Stacking kit
1 Place washer firmly on a stable, even and solid floor.
2 Peel protective paper off the tape from the stacking kit side bracket.
3 Fit the stacking kit side bracket firmly to the side of top plate by attaching the double- sided tape to top plate as picture shows.
Note
If there are some foreign objects on the surface of top plate, it becomes difficult to apply double- sided tape on.
4 Secure stacking kit side bracket to the washer with a screw on the back of bracket. Repeat Steps 2, 3, 4 for the other side.
5 Place the dryer on top of the washer by fitting legs as shown in the picture. Avoid finger injuries - be careful not to pinch fingers between the washer and dryer. Slide dryer slowly backwards to the stopper of kit.
6 Insert the front stacking kit. Push the front stacking kit back to the stoppers of side stacking kit.
7 Screw both sides of the front kit.
•Do not use stacking kit with a gas dryer in potentially unstable conditions like a mobile home.
1 3