Installation
External A/V Source Setup
How to connect
Connect the audio and video cables from the external equip- ment's output jacks to the TV input jacks, as shown in the figure.
When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).
How to use
1.Select the input source with using the TV/VIDEO button on the remote control. (If connected to A/V INPUT 1, select Video 1 input source).
2.Operate the corresponding external equipment. Refer to external equipment operating guide.
COMPONENT 2 |
| MONITOR |
|
|
DVD | OUTPUT |
|
| |
| /DTV |
|
|
|
COMPONENT 1 | INPUT | A/V |
| |
| INPUT1 | (MONO) |
R | L | R AUDIO L VIDEO |
AUDIO INPUT | VIDEO INPUT |
Camcorder
R AUDIO L VIDEO | Video Game Set |
Monitor Out Setup
The TV has a special signal output capability which allows you to hook up a sec- ond TV or monitor.
Connect the second TV or monitor to the TV’s MONITOR OUTPUT. See the Operating Manual of the second TV or monitor for further details regarding that device’s input settings.
NOTE
•Component,
DVD Setup
COMPONENT 2 |
| MONITOR |
|
DVD | OUTPUT |
| |
| /DTV |
|
|
COMPONENT 1 | INPUT | A/V | |
| INPUT1 | ||
|
| (MONO) |
R | L | R AUDIO L VIDEO |
AUDIO INPUT | VIDEO INPUT |
IN
(R) AUDIO (L) | VIDEO |
How to connect
1.Connect the DVD video outputs (Y, PB, PR) to the COM- PONENT (Y, PB, PR) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.
2.If your DVD only has an
audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.
NOTE: If your DVD player does not have component video output, use
How to use
1.Turn on the DVD player, insert a DVD.
2.Use the TV/VIDEO or COMP/RGB/DVI button on the remote control to select Component 1 or Component 2. (If connected to
3.Refer to the DVD player's manual for operating instruc- tions.
|
|
|
| COMPONENT 2 |
| MONITOR |
|
|
|
|
| DVD | OUTPUT |
| |
| DVI | COMPONENT1 | PC/DVI |
| /DTV |
|
|
OUTPUT | INPUT | INPUT | AUDIO INPUT | COMPONENT 1 | INPUT | A/V | |
|
|
|
|
|
| INPUT1 | (MONO) |
| R | L | R AUDIO L VIDEO |
DIGITAL AUDIO | RGB INPUT |
|
|
(OPTICAL) | (PC/DTV INPUT) |
| VIDEO INPUT |
| AUDIO INPUT |
or
or |
DIGITAL AUDIO | (R) AUDIO (L) | B | R | (R) AUDIO (L) | |
OPTICAL |
|
|
|
|
|
DVD
•Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports | Y | PB | PR | |
on the TV | ||||
|
|
| ||
|
|
|
| |
Video output ports | Y | Pb | Pr | |
Y | ||||
on DVD player | Y | Cb | Cr | |
| Y | PB | PR |
NOTES
•Digital Audio will not work for Component 2 input source.
•Digital Audio operation has priority if Digital Audio and AUDIO L/R are connected at the same time.
13