20 Plasma TV
Operation
- Choose preset labels for your channels.
- If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a DTV chan-
nel - even if you didn't preset a label for the channel.
1. Press the MENU button and then use D / Ebutton to select the SETUP menu.
2. Press the Gbutton and then use D / Ebutton to select Ch.Label.
3. Press the Gbutton. You will now see a screen filled with Labels and a preview screen.
4. Use the CH +/- button to select a channel to Label.
5. Use D / E/ F / G button to select the appropriate label for the channel, then press the OK button to set the Label to the
selected channel.
6. Press the EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Channel Label SetupChannel Label Setup
- Reveals how strong your DTV signal is and whether you need to adjust your antenna or digital cable input.
The higher the signal strength, the less likelyyou are to experience picture degradation.
- Digital DTV Signals: May not be available in all areas, nor are broadcast on all programs.
1. Press the SIGNAL button.
2. View the on-screen signal strength monitor to see the quality of the signal being received.
You can also check the DTV Signalstrength with the SETUP menu.
DTV Signal StrengthDTV Signal Strength
- Changes the picture source so you can watch your off-air TV, cable TV, VCR, DVD, or any other devices that are connected to
your TV.
1. Press the MENU button and then use D / Ebutton to select the SETUP menu.
2. Press the Gbutton and then use D / Ebutton to select Main Input.
3. Press the Gbutton and then use D / Ebutton to select the source: DTV, Analog,
Video1, Video2, Component1, Component2, RGB-DTV (or RGB-PC), DVI-DTV
(or DVI-PC).
4. Press the EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
Main Picture Source SelectionMain Picture Source Selection