LG Electronics E2211S Super Energy, SAVING Button, AUTO Button, INPUT Button, Power Indicator

Control Panel Functions

SUPER ENERGY	Use this button to enter SUPER ENERGY SAVING
SAVING Button	menu.For more information, refer to page 19.
AUTO Button	AUTO IMAGE ADJUSTMENT
	When adjusting your display settings, always press the
	AUTO button on the MONITOR SETUP OSD. (Only
	Analog Mode)
	This will automatically adjust your display image to the
	ideal settings for the current screen resolution size
	(display mode).
	The best display mode is
	E1911T/E1911S : 1366 x 768
	E2211T/E2211S/E2411T: 1920 x 1080

INPUT Button

(SOURCE Hot key)

When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. When only one signal is connected, it is automatically detected. The default setting is D-Sub.

(Only E1911T/E2211T/E2411T )

EXIT Button Exit the OSD(On Screen Display).

Power Button & Use this button to turn the display on or off.

Power Indicator

The power indicator stays white if the display is running properly (On Mode). If the display is in Sleep Mode (Energy Saving), the power indicator is blinking white.

13