6ASSEMBLING AND PREPARING
ENGLISH
Setting up the Monitor
Assembling the Stand Body and Base
1Place the Monitor with the screen side down on a flat and cushioned surface.
WARNING
yyIf you do not fasten the screws, the monitor may fall, which may result in damage to the product.
4Check the direction of the Stand Base and assemble it with the Stand Body. Using a coin, turn the screw clockwise to secure the Stand Base.
2Attach the Stand Body from the Monitor.
Insert the two Lockers of the Stand Body right into the groove of the Monitor head and secure
them by pressing the left and right bottom sides.
Locker
3Secure the Stand Body the monitor using 2 screws.
Stand Body
Stand Base
Coin
CAUTION
yyThis illustration depicts the general type of connection. Your monitor may differ from the items shown in the picture.
yyDo not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.
yyApplying excessive force when fastening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.