SETTINGS & TOOLS

3.1 Add New Device

Pairing is the process that allows a handset to locate, establish, and register 1-to-1 connection with a target device.

To Pair with a New Bluetooth® Device Using the Internal Keypad

1.Follow the Bluetooth® accessory instructions to set the device to pairing mode.

2.Press [MENU].

3.Press Settings & Tools.

4.Press Bluetooth Menu.

5.Press Add New Device. Set the desired device to pairing.

6.If Bluetooth® power is set to off, you will be prompted to turn

power on. Select Yes and press then press again.

7.The device will appear in Add New Device menu once it has

been located. Highlight the device and press .

8.The handset will prompt you for the passkey in BT. Consult the Bluetooth® accessory instructions for the appropriate passkey in BT (typically “0000” -

4 zeroes). Enter the passkey in BT

and press .

9.Once pairing is successful, select either Always Ask or Always

Connect (except audio devices) and press .

10.Once connected, you will see the device listed in the Bluetooth® Menu and the

Bluetooth® device connected

icon will show up on your enunciator when connected to the Bluetooth® device.

Icon Reference in Adding New Device

When the Bluetooth® wireless connection is built and paired devices are found, the following icons are displayed. (See Next Page)

74

Page 76
Image 76
LG Electronics EnV2 Add New Device, Press Settings & Tools Press Bluetooth Menu, Connect except audio devices and press