LG Electronics GSA-5120D manual Operation, Loading and ejecting a disc

Operation

Loading and ejecting a disc

Remember - AC adapter must be connected.

Make sure the power is turned on.

Loading a disc

1.Push the Eject Button to open the Disc tray.

2.Load a disc. (Label facing up.)

3.Close the Disc tray.

Ejecting a disc

1.Push the Eject Button to open the Disc tray.

2.Removing the disc.

3.Close the Disc tray after removing the disc.

Emergency Eject

This drive has a feature that allows the CD to be ejected manually in case of a drive failure or a power outage.

NOTE: Don’t use this feature except in an emergency.

1)Turn the power OFF.

2)Poke a fine-tipped object (such as a straightened heavy duty paper clip) into the small hole above the eject button. The front door will pop open and the disk tray will come partway out.

3)Pull the front door to open it all the way, then grip the disc tray between thumb and forefinger and gently pull it straight out.

NOTE: Use this feature for an ermergency purpose only.

Using it excessively will cause malfunction.

*If you cannot get a good grip on the disc tray with your fingers, use a steel binder clip or spring clamp to pull it out.

8