LG Electronics HS101 owner manual Function, Adjusting Video, APC Auto Picture Control, Menu

Function

Function

*In this manual, the OSD(On Screen Display) may be different from your Projector’s because it is just an example to help with the Projector operation.

*If there is no input signal present, the Menu will not be displayed.

*This operating guide explains operation of RGB(PC) mode mainly.

Video Menu Options

Adjusting Video

1. Press the MENU button( ) and then use F, G button to select

the menu.

2.Press the D , E button to select a video item you want to adjust.

3.Press the F, G button to adjust the screen condition as you want.

●Each adjustment of menu options will not affect other inputs.

As required, re-adjust menu options for the following input source : Video/Component (480i(576i)), Component (480p(576p), 720p, 1080i)

●To restore the original image condition after changing it, press AOK button after selecting [Reset] item.

●When receiving an NTSC signal, the picture item Tint is displayed and can be adjusted.(60Hz only)

●To exit the menu display, repeatedly press the MENU button().

			< RGB mode >
Contrast				50
Brightness				50
Color R				50
Color G				50
Color B				50
Reset
	MENU	Exit		F G Move		OK
			< Video mode >
APC				F			G
					Clear
Contrast				80
Brightness				50
Color				50
Sharpness				70
Tint				0
	MENU	Exit		F G Move		OK

APC (Auto Picture Control)

*Use APC to set the projector for the best picture appearance.

*This function will not work at the RGB mode and the Digital video mode.

1. Press the MENU button( ) and then use F, G button to select

the menu.

2.Press the D , E button to select APC item.

3.Press the F, G button to adjust the screen condition as you want.

●Each press of the D, E button changes the screen as shown below.

Clear Soft User

●To exit the menu display, repeatedly press the MENU button().

APC		F				G
				Clear
Contrast			80
Brightness			50
Color			50
Sharpness			70
Tint			0
	MENU Prev.	D	Move	F G	Select
		E

17