Troubleshooting
PROBLEM
CAUSE
CORRECTION
No power | The power cord is disconnected. | Plug the power cord into the wall outlet securely. | |
No picture | The TV is not set to receive the DVD signal. | Select the appropriate video input mode on the TV so the pic- | |
|
| ture from the DVD Receiver appears on the TV screen. | |
| The video cables are not connected securely. | Connect the video cables securely to both the TV and DVD | |
|
| Receiver. | |
There is little or no sound | Equipment connected via the audio cable is not set to | Select the correct input mode of the audio receiver so you can | |
| receive DVD signal output. | hear the sound from the DVD receiver. | |
| The audio cables are not connected to the speakers or | Connect the audio cables into the connection terminals cor- | |
| receiver securely. | rectly. | |
| The audio cables are damaged. | Replace with a new audio cable. | |
The DVD picture quality is poor | The disc is dirty. | Clean the disc using a soft cloth with outward strokes. | |
A DVD/CD will not play | No disc is inserted. | Insert a disc | |
| An unplayable disc is inserted. | Insert a playable disc (check the disc type, colour system | |
|
| and regional code). | |
|
|
|
|
| The disc is inserted upside down. | Place the disc with the label or printed side facing | |
|
| upwards. | |
| The menu is open on screen. | Press SETUP to close the menu screen. | |
| There is a parental lock which prevents the playback of DVDs | Enter your password or change the rating level. | |
| with a certain rating. |
|
|
Humming noise heard while a | The disc is dirty. | Clean the disc using a soft cloth with outward strokes. |
|
DVD or CD is playing | The DVD receiver is located too close to the TV, causing feed- | Move DVD receiver and audio components further away from |
|
| back. | your TV. | |
Radio stations can’t be tuned in | The antenna is positioned or connected poorly. | Check the antenna connection and adjust its position. |
|
properly |
| Attach an external aerial if necessary. |
|
| The signal strength of the radio station is too weak. | Tune to the station manually. |
|
| No stations have been preset or preset stations have | Preset some radio stations, see page 18 for details. | |
| been.cleared(when tuning by scanning preset channels). |
|
|
The remote control doesn’t | The remote is not pointed directly at the DVD receiver. | Point the remote directly at the unit. | |
work well / at all | The remote is too far from the DVD receiver. | Use the remote within 23 feet (7m) of the DVD receiver. |
|
| There is an obstacle in the path between the remote control | Remove the obstacle. | |
| and the unit. |
|
|
| The batteries in the remote control are flat. | Replace the batteries with new ones. | |
|
|
|
|
22