Mechanical Installation
Mounting Type
Clamping Type (Long Side)
Clamping Type (Short Side)
LGXXXS1C(W,K)-G3
Use four mounting holes on two opposite sides.
Clamping Range
(230mm)
Use four clamps on the long frame.
This method is not tested by IEC/UL.
Use four clamps on the short frame and | Use four clamps on the Short frame. | |
This installation is allowed in the following cases: | ||
two clamps at the center of long Frame. | 1. Slope roof: If module is installed parallel to the rooftop. | |
2. Flat roof: If installed with an additional stand such as wind | ||
| ||
| shield or deflector. |
7
