Getting started

Turning your phone on and off

Turning your phone ON

Getting

1.

Install a battery to the handset and connect the

 

phone to an external power source such as the

 

 

star

 

travel adapter, cigarette lighter adapter or

 

handsfree car kit. Or install a charged battery pack

 

 

ted

 

to the handset.

 

2.

Press and hold

for a few seconds until the LCD

 

screen is turned on.

3.Depending on the status of the PIN code request setting you may need to enter your PIN code.

Turning your phone OFF

1. Press and hold for a few seconds until the LCD screen is turned off.

Change codes

You can use the access codes described in this section to avoid unauthorised use of your phone. The access codes (except PUK and PUK2 codes) can be changed by using the Change codes feature (Menu 9.4.5).

PIN code (4 to 8 digits)

The PIN (Personal Identification Number) code protects your SIM card against unauthorised use. The PIN code is usually supplied with the SIM card. When the PIN code request is set to Enable, your phone will request the PIN code every time the phone is switched on. When the PIN code request is set to Disable, your phone connects to the network directly without the PIN code.

PIN2 code (4 to 8 digits)

The PIN2 code, supplied with some SIM cards, is required to access functions such as Advice of Call Charge and Fixed dial number. These functions are only available if supported by your SIM card. Check with your network operator for further information.

18

Page 18
Image 18
LG Electronics KG225 manual Turning your phone on and off, Change codes