LG Electronics L1742TQ, L1942TQ manual Auto Image Adjustment

Control Panel Functions

Control		Function
	Buttons	Use these buttons to select or adjust functions in the
		On Screen Display.

For more information, refer to page A15.

Use this button to make D-Sub or DVI connector active. This feature is used when two computers are connected to the display. The default setting is D-Sub.

AUTO/SET Button

Use this button to select an icon in the On Screen Display.

AUTO IMAGE ADJUSTMENT

When adjusting your display settings, always press the AUTO/SET button prior to entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode).

The best display mode is: 17 inch: 1280x1024

19 inch: 1280x1024

Power Button	Use this button to turn the display on or off.
Power Indicator	This Indicator lights up as blue when the display is
	operating normally(On Mode). If the display is in
	Sleep Mode (Energy Saving), this indicator changes
	to flicker.

A8