14
INSTALLATION INSTRUCTIONS

INSTALL THE BRACKET USING THE

BRACKET INSTALLATION SHEET

The Anti-tip bracket is packaged with an installation
template.
The instructions include necessary information to
complete the installation.
Read and follow range installation instruction sheet.
10. INSTALLING THE ANTI-TIP DEVICE
Leg leveler
Raise
range
Lower
range
Spirit level
Leg leveler
Raise
range
Lower
range
Spirit level
Leg leveler
Raise
range
Lower
range
Spirit level
• Range must be secured with an approved
Anti-Tip device.
• The range could be tipped by standing, sitting
or leaning on an open door if the range or
Anti-Tip device is not properly installed.
• After installing the Anti-Tip device, verify that
it is in place by carefully attempting to tilt the
range forward.
• This range has been designed to meet all
recognized industry tip standards for all
normal conditions.
• The installation of the Anti-Tip device must
meet all local codes for securing the
appliance.
• The use of this device does not preclude
tipping of the range when not properly
installed.
WARNING
A
Install the oven shelves in the oven and locate the
range where it will be installed.
B
Check if the range is level by placing a spirit level
or a cup, partially filled with water, on one of the
oven shelves. If using a spirit level, take two
readings— with the level placed diagonally first in
one direction –➀ and then the other –➁.
C
Remove the lower door. See the “CARE AND
CLEANING OF THE RANGE” section in the
owner's manual. The front and rear leveling legs
can be adjusted from the bottom.
D
Use an open-end or adjustable wrench to adjust
the leveling legs until the range is level.
11. LEVELING THE RANGE