INSIAllAIION
LEVELING THE REFRIGERATOR DOORS
&WARNING
Electrical Shock Hazard
•Be careful when you work with the hinges, base grille, and stopper. You may be injured.
•Do not put hands, feet, or metal items into the air vents, base grille, or the bottom of the
refrigerator. You may be injured or receive an electrical shock.
Leveling
&CAUTION
•To avoid possible injury or product or property damage, you will need two people to perform the following instructions.
After installing, secure the product with the LEG not to move left or right.
Your refrigerator has two front leveling
Kick Plate
Plug the power cord into a
•Open the Freezer Drawer.
•Once the drawer is open, there is sufficient clearance to remove the screws on top of the kick plate.
NOTE: To replace the kick plate, place it into position, and then insert and tighten the screws.
Level the refrigerator by using an 11/16 inch (18mm) wrench or a flat blade screw driver.
Turn the leveling legs (CCW) to raise or (CW) to lower the height of the front of the refrigerator.
NOTE: The front of the refrigerator should be slightly higher than the back.
NOTE: If someone pushes backward against the top of the refrigerator, weight is lifted off of the leveling legs, which makes adjustment easier.
Open both doors to make sure they close easily. If not, raise the leveling legs higher by turning both clockwise the same amount. Once the refrigerator is level, replace the kick- plate.
NOTE: Your new refrigerator is uniquely designed with two fresh food doors. Either door can be independently opened or closed.
You will have to exert slight pressure on the doors to close them completely.
NOTE: In order not to move the refrigerator back and forth, fix it with the 'Adjust'to the floor to install and use.
2O
