IMPORIAN!SAFELYINFORMAIlON
HOW TO CONNECT ELECTRICITY
f
IMPORTANT: Please read carefully.
&WARNING
Electrical Shock Hazard
b
For personal safety, this appliance must be properly grounded. Have the wall outlet and the circuit checked by a qualified electrician to make sure the outlet is properly grounded.
J
RECOMMENDED GROUNDING METHOD
The refrigerator should always be plugged into its own individual properly grounded electrical outlet rated for 120 volts, 60 Hz, AC only, and fused at 20 amperes. This provides the
best performance and also prevents overloading
house wiring circuits which could cause a fire hazard from overheated wires. It is
recommended that a separate circuit serving only this appliance be provided.
Use a receptacle which cannot be turned off with a switch or pull chain. Do not use an extension cord. Where a standard
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
Do not use an adapter plug.
NOTE: Some models have LED interior lighting and service should be performed by a qualified technician.
When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator Control, or Freezer Control, depending on the model) to the desired setting.
USE OF EXTENSION CORDS
Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord.
However, if you still elect to use an extension
cord, it is absolutely necessary that it be a
extension cord having a
SAVE THESE INSTRUCTIONS
5
