PX875P PRO/ PX875P
Appendix I: Over Clocking
Important
Before you attempt to overclock your system, we strongly recommend that you obtain a thorough understanding of all of the variables, procedures, and the potential risks associated with overclocking. Because we cannot control of all of the possible variables that exist (i.e. memory, AGP card, user configurations, cooling apparatus etc), we cannot assume responsibility from damage to any components of your system due to overclocking.
What is overclocking?
Overclocking is accelerating the processing speed of certain components of your system above and beyond what those components were rated for. With this mainboard, depending on the model, you may be able to overclock some or all of the following:
CPU Speed
FSB (Front Side Bus) frequency
DDR (Memory) frequency
AGP (Accelerated Graphics Port) frequency
PCI (Peripheral Connect Interface) frequency
SRC (Serial Reference Clock) frequency
How to calculate your new frequencies.
With this mainboard, the frequencies mentioned above are calculated using individual formulas. These formulas have a single “CPU Host Frequency” in common. For each of the items above there is also a multiplier or a divisor that is applied to the “CPU Host Frequency” to determine the final frequency for each component as shown in the following formulas.
CPU Speed | = | CPU Host Frequency | * | CPU Clock Ratio |
FSB frequency | = | CPU Host Frequency | * | FSB multiplier |
DDR frequency | = | CPU Host Frequency | * | DDR:CPU Ratio |
AGP frequency | = | CPU Host Frequency | / | AGP divisor |
PCI frequency | = | CPU Host Frequency | / | PCI divisor |
SRC frequency | = | CPU Host Frequency | / | SRC divisor |
Configuring your system for overclocking is simply understanding the formulas above and going into the BIOS Setup Utility and changing “DDR:CPU Ratio”, “CPU Clock Ratio” and “CPU Host Frequency”.
Note that the FSB multiplier for Intel based mainboards will always be fixed at 4. The AGP, PCI and SRC frequencies are all determined by the BIOS setting AGP/ PCI/ SRC Speed Setting.
52
