Intel PX875P warranty RAM Module Installation

PX875P PRO/ PX875P

To Enable Dual-Channel DDR, the following conditions must be met:

1.You must use either DIMM1 & DIMM3 together or DIMM2 & DIMM4 together or all four DIMM slots together.

2.You must use matching DIMM configurations between DIMM1 & DIMM3. You must use matching DIMM configurations between DIMM2 & DIMM4.

zSame Density (128MB, 256MB, 512MB, etc.)

zSame DRAM technology (128Mb, 256Mb, or 512Mb)

zSame DRAM bus width (x8 or x16)

zBoth either single-sided or dual-sided

zSame brand

zSame timing specifications

zSame DDR speed

A => Memory Module Type A, B => Memory Module Type B, X => None.

DIMM1

DIMM2

DIMM3

DIMM4

A	A	A
B	B	B
A	B	A
B	A	B
A	X	A
B	X	B
X	A	X
X	B	X

A B B A X X A B

RAM Module Installation:

1.Pull the white plastic tabs on each side of the slot away from the slot.

2.Match the notch on the button of the RAM module with the corresponding pattern in the DIMM slot. This ensures that the module is inserted properly.

3.Lower the RAM module into the DIMM Slot and press firmly using both thumbs until the module snaps into place.

4.Repeat steps 1, 2 & 3 for the remaining RAM modules.

＊The pictures above are for reference only.

12