ttOW10USESETTING THE FUNCTIONS
Press the button for the desired function to vieW and
select other settings.
SETTING THE DISPENSER LOCK
PreSSand hold the
ALARM/LOCK
button for three seconds
to lockthe dispenser and
all of the othercontrol panel
i_ functions. Press and hold
again for 3 seconds to
unlock.
SETTING THE DOOR ALARM
The ALARM/LOCK button
also controlsthe door
alarm that sounds three
times in 30-second
intervalswhen a
compartment door is
K1)) left open for more than
60 seconds. The alarm
stops sounding when
the door is closed.
Press the ALARM/LOCK button once to activate
and deactivate the door alarm function.
NOTE: Contact your local service center
ifthe alarm continues to sound after the
doors are closed.
RESETTING THE FILTER INDICATOR
Press and hold the
LIGHT/FILTER button for more
than 3 seconds to reset
the filter indicator after the
water filter has been
CHANGE
t_ ...... replaced.
nj MONT,
NOTE: It is recommended that you replace the filter
when the water filter indicator light reaches 0 or
whenever the water or ice cube taste deteriorates
noticeably.
ACTIVATING ICE PLUS
Press the ICE PLUS button
once to activate the ICE PLUS
function. The ICE PLUS icon on
the display panel will illuminate
when activated.
...._ The ICE PLUS function runs the
freezer compartment at the
coldest setting for a 24-hour
period to increase icemaking by
up to about 20%, and then turns
off automatically.
NOTE: Press the button again to cancel
the ICE PLUS function.
DIAGNOSTIC FAILURE DETECTION
The diagnostic function automatically detects problems with your refrigerator, and adiagnostic code will
appear in the display. NOTE: If a diagnostic code appears in the display during use, note the code and
then call 1-800-243-0000 (24 hours per day/7 days per week) and select the option to locate an
authorized servicer.
26