ENGLISH ESPAÑOLFRANÇAIS
13
2. Remove bolt and hinge-C and take off
refrigerator door .
Move cap to the side not used.
Move door bracket and screw to the
side you wish and reinstall.
3. Move hinge-U pin and top cover cap .
Assemble the refrigerator door .
Assemble hinge-C and bolt .
Assemble freezer door .
Assemble the hinge-L and bolt .
Assemble base cover and screw .
After Completing the job■Make sure that the four corners of the door
gasket are not folded. It is recommended to
apply a small amount of silicon grease on
them.
■Adjust the leveling screw on the bottom to
the highest level so that the front side of the
refrigerator is higher than the rear side.
■If you need assistance after switching the
direction of the door opening as shown
above, call a service center.
15
12
14
11
5
4
21
10
2
1
21
Reversing the doors is not covered by the
warranty.
NOTE