The other functions
How ice/cold
water is supplied
How to use dispenser
Operation
Door open warning
3 times of warning sounds at the interval of 30 seconds if a minute passes with the door of refrigerator and the hombar door opened or completely closed.
Please contact with the local service center if warning continue to sound even after closing the door.
Diagnosis (failure detection) function
Diagnosis function automatically detects failure when failure is found in product during the use of refrigerator.
If failure occurs at product, it does not operate though pressing any button and normal indication is not done. In this case, do not turn power off but immediately contact with the local service center. A lot of time are need for service engineer to detect the failed part if turning it off.
Water is cooled while stored in the water tank in the refrigerator compartment, and then sent to the dispenser.
Ice is made in the automatic ice maker and sent to the dispenser divided into crushed or cubed form ice.
NOTE
•It is normal that the water is not very cold at first. If you want colder water, add ice into the glass.
Select one among crushed ice, water, and cubed ice and slightly press the push switch with a glass or other container.
Water |
| Crushed ice |
| Cubed ice |
|
Light the water | Light the crushed ice | Light the cubed ice | |||
indicating lamp by | indicating | lamp by | indicating lamp by | ||
pressing the selection | pressing the selection | pressing the |
| ||
button. |
| button. |
| selection button. |
|
• Water will be dispensed | • Crushed ice will be | • Cubed ice will be dispensed | |||
by pressing the push | dispensed by pressing the | by pressing the push | |||
switch with a glass. | push switch with a glass. | switch with a glass. | |||
DISPENSER | WATER | DISPENSER | CRUSH | DISPENSER | CUBE |
16
